Mactoom 10mm x 1 HSS Metric Tap and 10mm x 1.5 Die Set Right Hand Thread,Tapping DIY Tool 3pcs (M10 x 1mm)
(as of Dec 08,2022 19:44:19 UTC – Details)
A little rust may occur due to packing and transportation problems. It will not affect normal use.
1.Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
2. Please control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.
3. First drill the hole with twist drill, and then use the taps tapping. Tapping angle should be vertical 90 degree and keep stable.
4. Tapping depth should not exceed 1.5 times the diameter of the tap: For example: diameter of M6x1 about 6mm, the depth should not exceed 9mm.
We look forward to providing the best service to you
If you need any help or have any suggestions, please don’t hesitate to contact us anytime , we will reply you within 24 hours and try the best to help you.
【High Quality】 – High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials
【Application Range】 – Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc
【Feature】 – Full grinding thread, sharp and durable, tap automatic fine grinding process, clear thread, sharp blade, to meet the processing requirements
【Package Include】 – 2pc M10 x 1 Metric TAP & 1pc M10 Metric DIE